Step 2 : Setting Up The Remote Commander - Sony SLV-D983P GI Operating Instructions Manual

Step 2 : Setting up the remote commander

Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the batteries to the
diagram inside the battery compartment.
Insert the negative (–) end first, then push in
and down until the positive (+) end clicks
into position.
Reattach the cover after inserting the battery.
Using the remote commander
You can use this remote commander to
operate this DVD-VCR and a Sony TV.
Buttons on the remote commander marked
with a dot (•) can be used to operate your
Sony TV.
If the TV does not have the
the remote sensor, this remote commander
will not operate the TV.
To operate
the DVD player
the VCR
your TV
10
Setting up the remote commander
symbol near
Set TV / DVD·VIDEO switch to
DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the
DVD-VCR
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the
DVD-VCR
TV and point at the remote sensor at your TV
Remote sensor
TV / DVD·VIDEO
switch
SELECT VIDEO
SELECT DVD