Sony SLV-D983P GI Operating Instructions Manual page 46

3
ENTER
4
1 2 3
4 5 6
7 8 9
0
CLEAR
ENTER
5
ENTER
INPUT
SELECT
CLEAR
46
Recording TV programmes using the VIDEO Plus+
Press V/v to select "VideoPlus," then press
ENTER.
The "VideoPlus" menu appears.
Press the number buttons to enter the PlusCode
number.
If you make a mistake, press CLEAR and
re-enter the correct number.
You can also press B to delete the last entered
number.
Press ENTER.
The programme position, date, start and stop
times, tape speed and PDC (Programme
Delivery Control) setting appear on the TV
screen.
• If "– –" appears in the "PR" (programme)
column (this may happen for local
broadcasts), you have to set the appropriate programme position
manually.
Press V/v to select the desired programme position. Without setting the
programme position, you cannot select the date, start and stop times, tape
speed and PDC setting.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the "PR"
position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
PR DATE
– –
– –
– –
– –
– –
® system
VideoPlus
Code – – – – – – – – –
Code : 0–9
B
Correct :
SET UP
RETURN
VideoPlus
Code 1 2 3 4 – – – – –
Code : 0–9
B
Correct :
ENTER RETURN SET UP
START STOP SPEED PDC
35 SA 19 19 : 00 20 : 00 SP Off
– – – – – – : – – – – : – – – – – –
– – – – – – : – – – – : – – – – – –
– – – – – – : – – – – : – – – – – –
– – – – – – : – – – – : – – – – – –
– – – – – – : – – – – : – – – – – –
V v B b
SETUP
ENTER CLEAR