Sony SLV-D983P GI Operating Instructions Manual page 103

Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• When you connect another VCR to the
LINE-3 or LINE-2 connector, press
INPUT SELECT to display "L3" or "L2"
in the display window.
• Press SELECT VIDEO to control the
VCR.
• Press SP/LP to select the tape speed, SP or
LP.
1
Insert a source tape with its safety tab removed into the other (playback) VCR. Search for
the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to
start recording and press X to set it to playback pause.
3
Press REC on this VCR to set it to recording pause.
z
4
To start editing, press the X (pause) buttons on both VCRs at the same time.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X on this VCR when an unwanted scene
begins. When it ends, press X again to resume recording.
x
X z REC
103
Editing