Sony SLV-D983P GI Operating Instructions Manual page 78

To cancel the setting
Select "Off" in step 2.
Notes
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (COAXIAL) jack and set "Dolby Digital" to "Dolby
Digital" or "DTS" to "On" in "AUDIO SETUP" menu, sound will come from your speakers
but it will not have the surround effect.
• You cannot perform playback quickly or slowly with sound when a virtual surround effect is
set (page 34).
78
Virtual surround setting