Playing Discs; Resuming Playback From The Point Where You Stopped The Disc (Multi-Disc Resume) - Sony DVP-NS50P Service Manual

DVP-NS50P/NS41P/NS52P
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 60)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 60)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an
amplifier (receiver) ? Select the type
of jack you are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
13.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 13.
If you connected an AV amplifier
(receiver) using a digital coaxial cord,
select "YES: DIGITAL OUTPUT."
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
Additional operations
CLEAR
REPLAY ADVANCE
ZOOM
SLOW PLAY
FAST PLAY
To Operation
Press x
Stop
Press X
Pause
Press X or H
Resume play after
pause
Press >
Go to the next chapter,
track, or scene in
continuous play mode
Press .
Go back to the
previous chapter,
track, or scene in
continuous play mode
Press Z
Stop play and remove
the disc
Replay the previous Press
1
scene* REPLAY during
playback
Briefly fast forward Press
2
the current scene* ADVANCE during
playback
3
Magnify the image* Press ZOOM
repeatedly. Press
CLEAR to cancel.
1
* DVD VIDEOs/DVD-RWs/DVD-Rs only
2
* DVD VIDEOs/DVD-RWs/DVD-Rs/
DVD+RWs/DVD+Rs only
3
* Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be canceled automatically when the picture
is moved.
Note
You may not be able to use the Replay or Advance
function with some scenes.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
D-PCM
DTS:
48kHz/96kHz PCM: DOLBY DIGITAL
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
48kHz/96kHz PCM:
OFF
ON
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "ON." Otherwise,
select "OFF."
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
23
Playback quickly or slowly with
sound
You can listen to dialog or sound while
playing the current scene quickly or slowly.
During playback, press FAST PLAY or
SLOW PLAY.
The speed changes when you press either
FAST PLAY or SLOW PLAY.
To return to normal playback
Press H.
Notes
• You can only use this function with DVDs/
VIDEO CDs/Super VCDs and DVD-RWs in VR
mode only.
• "Operation not possible" will appear when
maximum or minimum speed is reached.
• During Fast Play or Slow Play mode, you cannot
change the angle (page 44), subtitle (page 44) and
sound (page 41). The sound can only be changed
for VIDEO CDs/Super VCDs.
• Fast Play and Slow Play functions do not work
when playing DTS sound tracks.
• You cannot use Fast Play or Slow Play functions
when playing a still picture on DVD-RW in VR
mode.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
and Z
A
on the front panel display. The
buttons on the player or the remote do not
work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select "RESET" under "SETUP" in the
Control Menu (page 59), the disc tray remains
locked.
25

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
RETURN
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
24
Resuming Playback From
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. If you store a resume playback point for
the seventh disc, the resume playback point
for the first disc is deleted.
1
While playing a disc, press x to
stop playback.
"RESUME" appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
26
1-6
4
Press A on the player, and place a
disc on the disc tray.
Playback side facing down
5
Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 27. For VIDEO CDs,
see page 28.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
ENTER whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
"AUTO POWER OFF" in "CUSTOM SETUP" to
"ON" or "OFF" (page 61).
Notes on playing DTS sound tracks on a
DVD VIDEO
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL) jack.
• When you play a DVD VIDEO with DTS
sound tracks, set "DTS" to "ON" in
"AUDIO SETUP" (page 63).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 63). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Note
Discs created on DVD recorders must be correctly
finalized before they can be played. For more
information about finalizing, refer to the operating
instructions supplied with the DVD recorder.
Notes
• "MULTI-DISC RESUME" in "CUSTOM
SETUP" must be set to "ON" (default) for this
function to work (page 62).
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, CDs, DATA CDs,
and DATA DVDs the player remembers the
resume playback point for the current disc.
The resume point is cleared when:
– you opened the disc tray.
– you disconnect the power cord (CD or DATA
CD/DATA DVD only).
– the player enters standby mode (DATA CD/
DATA DVD only).
• Resume Play does not work during Shuffle Play
and Program Play.
• This function may not work with some discs.
• If "MULTI-DISC RESUME" in "CUSTOM
SETUP" is set to "ON" and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.