2-4. OPTICAL PICK-UP
(DEVICE, OPTICAL KHM-310CAA/C2RP)
2 FFC Holder
3 Optical Device
(KHM-310CAA/C2RP)
6 Two Insulator
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
After take-out FMD-004 Flexible cable from CN101 of
MV-045 board immediately ground FMD-004 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
4 MD-108 Harness (CN201, 6P)
1 Four Insulator Screws
2-3
DVP-NS50P/NS41P/NS52P
Note:
Solder short land before
remove the harness from
24 pin BU connector.
6 Two Insulator
5 FMD-004 Flat Flexible Cable
(CN101, 24P)