Impex NS-1000 Owner's Manual page 9

STEP-3
A.) Remove the Ø 1" x Ø ⅜" Flat Washer (#21) and M10 Aircraft Nut (#18) from one end of the Axle
(#22).
B.) Insert this open end of Axle through the pivot on Right Handlebar, pivot on Main Frame (#1), and
through the pivot on Left Handlebar (#3). Secure the open end of Axle with the Ø 1" x Ø ⅜" Flat
Washer (#21) and M10 Aircraft Nut (#18) removed in procedure A.
C.) Securely fasten Bolts and Nuts in Step-2 and Step-3. Cover the two Aircraft Nuts (#18) by two
Cover Caps (#31).
© IMPEX INC. 8 www.impex-fitness.com