Setting Up A Usb Driver In Windows 98 Second Edition - Motorola SURFboard SBV5120 User Manual

Introduction

Setting Up a USB Driver in Windows 98 Second Edition

1
Insert the SURFboard VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.
2
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
Startup for a Single User"
Hardware Wizard window is displayed:
3
Click Next. The following window is displayed:
SBV5120 VoIP Cable Modem User Guide
Installation
on page 8. A few seconds after you complete the USB connection, the Add New
Troubleshooting Glossary License
"Cabling and
11