Setting Up A Usb Driver In Windows 98 - Motorola Wireless Cable Modem Gateway SBG1000 User Manual

Overview Installation Troubleshooting Contact

Setting Up a USB Driver in Windows 98

1
Insert the SBG1000 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must
be inserted and read by the PC before you connect the SBG1000 to the PC.
2
Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click Next. The following window is displayed:
4
Be sure "Search for the best driver for your device" is selected.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
USB Connection.
X
109
Exit
FAQ Specifications Glossary License
SBG1000 User Guide