Motorola SBG900 User Manual page 53

Overview Installation Troubleshooting Contact
Gateway > PORT TRIGGERS — predefined page fields
Field
Name
Enable
Protocol
Port Range
Session Chaining
Session Interval
Address Replace
Multi Host
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
Description
Displays the unique name for the port triggers. This is typically the protocol name.
Select the Enable check box to activate the port triggers for the predefined application.
Displays the transport protocol for the port trigger — TCP or UDP.
Displays the port range (From/To) for the port trigger.
Displays the session chaining selection for the port trigger — Disable, TCP, or TCP/UDP.
Displays the session interval set for the port trigger.
Displays the address replacement method for the port trigger.
Displays the multi host selection for the port trigger.
X
47
Exit
FAQ Specifications Glossary License
SBG900 User Guide