Answer On/Off - AT&T EL52106 User Manual

Answering system
Answering system settings

Answer on/off

Unless you change it, the answering system is on and ready to record
messages. If the answering system is on, the ANS ON icon displays on the
handset screen and the
on. You can turn the answering system off, but if you do so, the answering
system does not answer calls and record incoming messages.
Using the handset:
1. Press MENU/
2. Press CID or
then press
MENU
CID or
3. Press
then press
MENU
CID or
4. Press
then press
MENU
Using the telephone base:
/ ANS ON/OFF to turn the answering
• Press
system on or off. If the answering system is turned
on, it announces, "Calls will be answered." If the
answering system is turned off, it announces,
"Calls will not be answered."
NOTES:
• If the answering system is off and there is an incoming call, the system answers after 10 rings
and announces to the caller, "Please enter your remote access code." For more information
about remote access, see Remote access code on page 58.
• You can turn the answering system on or off from either the handset or the telephone base,
but you can only use the handset to change the other answering system settings.
• You cannot turn the answering system on or off while a handset is on a call or the telephone
base is playing messages.
/ ANS ON/OFF light on the telephone base is
when the handset is idle.
SELECT
DIR to scroll to Answering sys,
/SELECT.
DIR to scroll to Answer on/off,
/SELECT.
DIR to select between On and Off,
/SELECT to save the setting.
54
Answer on/off
ECO
On
ECO