AT&T EL52106 User Manual page 59

Answering system
Answering system settings
To record a new announcement:
1. Press MENU/
2. Press CID or
3. Press /SELECT to select Announcement. The system announces, "To
MENU
play, press 2. To record, press 7."
4. Press 7. The system announces "Record after the tone. Press 5 when you
are done."
5. Face the handset and speak towards the microphone to
record your announcement.
Press 5 when you finish the recording. The handset plays
6.
back the recorded announcement.
NOTE: If the answering system memory is full, when you press 7 in Step 4, the answering
system announces, "Memory is full." You must delete some messages before you can record
a new announcement. Refer to Message playback on pages 64-66.
To delete an announcement:
Press MENU/
1.
2. Press CID or
3. Press /SELECT to select Announcement. The system announces, "To
MENU
play, press 2. To record, press 7."
Press 2 to play the current announcement from the speakerphone.
4.
5. Press 3 during playback to delete your recorded announcement. The
system announces, "Announcement deleted."
If your announcement is deleted, calls are answered with the default
announcement, "Hello. Please leave a message after the tone."
when the handset is idle.
SELECT
DIR to scroll to Answering sys, then press
when the handset is idle.
SELECT
DIR to scroll to Answering sys, then press
53
/SELECT.
MENU
Recording... Stop
[5]
ECO
/SELECT.
MENU