Maintenance Fundamentals; Pre-Ride Inspection - Honda CB300FA Owner's Manual

•
s::
"'
:;·
...+
"'
:J
"'
:J
('\
"'
36
Maintenance Fundamentals
Pre-ride Inspection
To
ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected . A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tire, can be a major inconvenience .
Check the following items before you get on
your motorcycle:
•Tire tread wear and air pressures are within
limits.
~
P. 45
• Lights, horn, and turn signals operate
normally.
• Check the condition of the drive chain.
Adjust slack and lubricate as needed.
~P.
67
Check the following items if you are carrying
a passenger or cargo:
• Comb ined weight is w ithin load limits.
~P . 119
• Cargo is secured properly.
• Suspension spring preload is adjusted to
suit load.
~
P. 76
Check the following items after you get on
your motorcycle:
•Throttle action moves smoothly without
binding.~
P. 74
• Brake lever and pedal operate normally.
• Check the fuel level and refuel when
needed.~
P. 13, 28
• Engine stop switch functions properly.
~P. 24
Check the following items at regular intervals:
•Oil level is between the upper and lower
marks.
~
P. 57
• Brake fluid level is
Front: above the LWR mark.
Rear: between the LOWER and UPPER level
marks.
~
P. 64
• Engine coolant level is between the UPPER
and LOWER marks.
~
P. 62
•Side stand functions
properly.~
P. 27, 66