Motorola SURFboard SB4100 User Manual page 21

R
Introduction Before You Begin Installation Operation
Uninstalling for Windows 2000
1 On the Windows Desktop, click Start.
Select Settings and then Control Panel
2
from the pop-up menu.
Double-click System.
3
4 Select the Hardware tab.
5 Click Device Manager (center right in
window).
Double-click Network Adapters.
6
Highlight SB4100.
7
This uninstalls the device from your computer system; however, the operating system (O/S) may leave
some driver files on the hard drive. Refer to Removing O/S Files.
Basic Configuration
8 Right-click SB4100.
or
Click Other to locate the SB4100 if it does
not appear in the Network Adapters.
9 Click Uninstall.
Click OK.
10
17
Troubleshooting
TM