Replacement Parts - Bissell POWERFORCE COMPACT 1539 User Manual

Clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the dirt cup
on page 6.
3. Remove the dirt cup filter assembly from
the dirt cup, following step 2 of Clean the
dirt cup filter on page 6.
4. Tap the dirt cup filter assembly over a
garbage container to remove any dirt or
debris from the cyclone screen that sur-
rounds the dirt cup filter.

Replacement Parts

These items are available for purchase as accessories for your BISSELL vacuum:
To purchase visit www.BISSELL.com.
PART # PART NAME
160-5246 Dirt Cup Filter
160-5247 Post-Motor Filter
160-4758 Hose with Handle
160-3058 Crevice Tool
160-2839 Turbine Floor Tool
160-3059 Upholstery Tool
5. Reach up into the dirt cup to clear any dirt
or debris from the dirt cup.
6. Check to see if there are any clogs
in the suction inlet.
7. After clearing any dirt or debris from
the dirt cup, replace the dirt cup filter
assembly back in the dirt cup following step
8 of Cleaning the dirt cup filter on page 6.
PART # PART NAME
160-5243 Multi-Surface Floor Nozzle
160-3060 Dusting Brush
160-2832 Extension Wands (2)
160-3063 TurboBrush™ Tool
160-2840 Hard Floor Tool
160-3061 Tool Holster
7