Battery Installation - AT&T EL51200 Quick Start Manual

Battery installation

Install the battery, as shown below.
1. Plug the battery connector securely into the socket inside the handset battery compartment,
matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing
up, as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards until it clicks
into place.
CHARGE light
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,
visit our website at
1 (866) 288-4268
In Canada, dial
www.telephones.att.com
3. Charge the handset by placing it face
up in the telephone base or charger.
The CHARGE light is on when charging.
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow the
instructions to install and charge the new
battery.
, or call
.
4
1 (800) 222-3111
.