Wsm6300 Installation Procedure - Motorola WSM6300 User Manual

MEA

WSM6300 Installation Procedure

1. Mount the WSM6300 in a suitable location. The device is environmentally sealed. Refer
to the Deployment section of this document and the MEA Guidelines for Network
Deployment manual for deployment location recommendations.
The WSM6300 chassis must be grounded to prevent the possibility of damage induced by
Electro Static Discharge (ESD).
2. Connect the antenna or antenna cable to the to the N-type antenna port.
3. Insert the Power Plug / Serial connector into 6-pin connector port.
Pin Number
1
2
3
4
5
6
WARNING
Figure 2.
Signal
PWR GND
5 – 14.0 VDC
GPIO5 (0 to 3.3 V)
TX(RS-232) or A+(RS-485) – from ASIC
RX(RS-232) or B-(RS-485) – to ASIC
Signal GND
WSM Serial Cable
Power/Serial Cable Color
3
WSM6300 Users Guide
Black
Red
Blue
Brown
Orange
Black