Cleaning - Bewatec MediPaD 10 LX Operating Manual

SAFETY
1.6 CLEANING
All BEWATEC flat screens, telephones and equipment are especially designed, developed and produced for
the operation at the patient's bedside (Point‐of‐care) respectively couch side since 1998.
This is the reason why we use only materials which completely fulfill the requirements of the daily usage in
the day‐to‐day operation of a hospital to produce our components.
The experience with more than 140.000 sold flat screen/telephone‐units shows that these products can be
installed in intensive care units or in bone marrow transplantation centers where detergents and
disinfectants are used in a very high concentration.
Our customers in hospitals, dialysis wards and rehabilitation clinics for example use detergents and
disinfectant like:
Fresenius Medical Care Deutschland GmbH
B. Braun Melsungen AG
Bode Chemie GmbH
Schülke & Mayr GmbH
Ecolab Deutschland GmbH
Due to this experience BEWATEC flat screens, telephones and mounting solutions can be generally cleaned by
wipe disinfection with each common detergent and disinfectant in a hospital and dialysis ward.
Please observe the following points during the cleaning of a device:
‐ To avoid damage to plastic parts please do not use abrasive, alkaline or acid cleaners or disinfectants
‐ Test the compatibility of the cleaner/disinfectant in an inconspicuous place first
‐ Clean/disinfect the surfaces with a damp cloth
‐ Pay attention to the cabinet slots or openings on the mounting to avoid the penetration of liquids into
the interior while using a cleaner/disinfectant spray
‐ Avoid a too long influence of the cleaner/disinfectant on the surfaces
8 / 36
‐ ClearSurf und Freka®‐NOL
‐ Melsept® SF and Meliseptol® Foam pure
‐ Mikrobac® forte and Kohrsolin®FF
‐ Terralin® Liquid
‐ Incidin®Active and Incidin®Plus
Operating manual MediPaD 10 LX