Starting-Up; Connecting And Turning On - Bewatec MediPaD 10 LX Operating Manual

STARTING-UP

3 STARTING‐UP
3.1 CONNECTING AND TURNING ON
Operating manual MediPaD 10 LX
Depending of the mounting solution
there are two different ways of
connecting the device.
1. Connect the 20W1 socket to the 20W1
plug on the backside of the device.
2. Connect the 10W1 plug to the 10W1
connection socket.
4. Plug the short RJ45 patch cable into the
RJ45 socket of the combined 10W1/RJ45
plug.
5. Connect the other end of the short RJ45
patch cable to the on‐side RJ45 data
socket
or
5. Connect the integrated network cable to
the LAN‐IN socket of the device.
15 / 36