Technical Notes - Bewatec MediPaD 10 LX Operating Manual

TECHNICAL DATA
6.1 TECHNICAL NOTES
Button combination
Press button „PROG./CH." and „PROG./CH +"
simultaneously for more than 5 seconds on
the glass front.
Press button ON/OFF and HOME
simultaneously for more than 5 seconds on
the glass front.
Keep button ON and VOL‐ simultaneously
pressed until the LED of the ON/OFF buttons
flashes.
Thereafter press button ON/OFF again for
confirmation.
Operating manual MediPaD 10 LX
Description
The software and hardware revision is displayed.
Device is performing a reset. The device restarts.
The device performs the function RECOVERY.
The device installs the internally saved default
software. The device is set to factory defaults.
33 / 36