STARTING-UP
3.2
CONFIGURATION
Please note that the device actually cannot be configured by using the MyMediNet Online
Management System. For the first start‐up and configuration of the device you will receive an
additional configuration data file via e‐mail.
For the configuration of the devices you will need a blank USB flash drive.
If necessary further steps, such as performing a frequency scan for digital TV reception (DVB‐C),
must be observed.
This will be communicated separately to you.
INFORMATION
Requirements for the update via USB flash drive:
– For the easier e‐mail delivery the transmitted files are compressed.
– Encrypt these files to a blank USB flash drive (without any sub folder).
– Plug the USB flash drive to the USB interface of the device.
– Follow the display instructions.
Operating manual MediPaD 10 LX
17 / 36