—Headlights
High beam (inside)
Low beam
(outside)
1. Open the hood. Turn the bulb base
counterclockwise to the front of the
vehicle as shown.
The above illustration shows the left−hand
headlight.
424
'08 Rav4_U (L/O 0802)
2. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.
3. Plug in a new bulb into the connec-
tor and install it into the mounting
hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2008 RAV4 from Feb. '08 Prod. (OM42726U)