ZTE Unite III User Manual ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26779999 URL: www.ztedevice.com E-mail: mobile@zte.com.cn...
Page 2
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Messaging Settings ......................... 33 Warning and Notice ........................34 To the Owner .......................... 34 Using Your Device ......................... 34 Using Battery ......................... 34 Limited Warranty ........................35 Limitation of Liability ......................35 Confidential and Proprietary Information of ZTE CORPORATION 1...
Page 4
ZTE Unite III User Manual FCC Regulations ........................35 RF Exposure Information (SAR) ................... 36 Disposal of Your Old Appliance .................... 37 Troubleshooting ......................... 37 2 Confidential and Proprietary Information of ZTE CORPORATION...
ZTE Unite III User Manual Getting Started Introduction ZTE Unite III is a 4G mobile hotspot device, working in LTE/CDMA network. The client devices can connect to it via Wi-Fi. The device supports data services, enabling you to communicate anytime and anywhere.
Internet and the data is been network being connected. used. Battery is low. There are new messages or unread messages. Battery is full. Installing Your Device Inserting the micro-SIM Card 1. Open the micro-SIM card slot. 4 Confidential and Proprietary Information of ZTE CORPORATION...
Page 7
2. Insert the micro-SIM card into the card slot. Inserting the battery 1. Remove the battery cover. Insert the battery as shown with the contacts located against the metal springs, and press the battery down into the case. Confidential and Proprietary Information of ZTE CORPORATION 5...
LCD screen will be turned off. In the sleep mode, the Wi-Fi function will be disabled. Press the Lock key to wake up the device and enable the Wi-Fi function, and the LCD screen will be turned on. 6 Confidential and Proprietary Information of ZTE CORPORATION...
Keep the micro-SIM card away from electrical and magnetic appliances. If you cannot get service, make sure that: You are in an area which has network coverage. • You are using the correct micro-SIM card. • Confidential and Proprietary Information of ZTE CORPORATION 7...
Follow the following steps and figures for Windows XP to configure the Wireless Internet Protocol for your connection. NOTE: Wireless Network Connection is used for Wi-Fi connection. Right-click My Network Places and then select Properties. • 8 Confidential and Proprietary Information of ZTE CORPORATION...
Page 11
Right-click the Wireless Network Connection, and then select Properties. • Select Internet Protocol (TCP/IP), and then click Properties. • Select these two items, and then click OK to finish the configuration. • Confidential and Proprietary Information of ZTE CORPORATION 9...
Select the SSID of your device, and then click Connect. NOTE: heck the label on your device to get the default SSID and password. Please c Input the password, and then click Connect. 10 Confidential and Proprietary Information of ZTE CORPORATION...
Disconnecting from the Internet Log in the WebGUI Configuration page, and click Setting > Network Settings > Data Settings to turn off mobile data. NOTE: Powering off the device can also terminate the Internet connection. Confidential and Proprietary Information of ZTE CORPORATION 11...
Navigating the Device Slide the power key to ON position to turn on the ZTE Unite III. The screen lights up. After the initialization of the ZTE Unite III, press and hold to unlock the screen, and then the following...
Make sure the connection between your device and the client is correct. Launch the Internet browser and enter http://192.168.1.1 http://uscc.hotspot in the address bar. 3. The login page appears as follows. The following figure is only for your reference. Confidential and Proprietary Information of ZTE CORPORATION 13...
Internet status : Connected to the Internet and the data was unused. : Disconnected from the Internet. Wi-Fi strength : Wi-Fi status and number of the connected users, the maximum number is 15. 14 Confidential and Proprietary Information of ZTE CORPORATION...
In the WebGUI Configuration page, click Settings > Quick Settings. Read the guide carefully, and then click Next. Set PPP Profile Configuration in the following figure and then click Next. Set PPP Authentication in the following figure and then click Next. Confidential and Proprietary Information of ZTE CORPORATION 15...
Page 18
Set Security Configuration in the following figure and then click Next. Encryption will keep your traffic from being unauthorized monitored and accessed, select one encryption mode from the list, and then set key and/or algorithm for it. 16 Confidential and Proprietary Information of ZTE CORPORATION...
Select Settings > Network Settings > Data Settings. The Data Settings page is shown in the following figure. You can allow mobile data and data roaming on. Network Selection Select Settings > Network Settings > Network Selection. The Network Selection page is shown in the following figure. Confidential and Proprietary Information of ZTE CORPORATION 17...
Page 20
Click Apply to confirm your configuration. APN Setting Add new APN • Select Settings > Network Settings > APN Setting. The APN parameters are shown in the following figure. Click Add New to access the following figure: 18 Confidential and Proprietary Information of ZTE CORPORATION...
Page 21
User Name User name is used to obtain authentication from the ISP when the connection is established. Password Password is used to obtain authentication from the ISP when the connection is established. Confidential and Proprietary Information of ZTE CORPORATION 19...
Page 22
Enter the related parameters (please see following table), and then click Apply to add a new profile. Click Set as default to set current profile as the default profile. Select Settings > Network Settings > Data Settings, select to turn on Allow Mobile Data, and then click Apply. 20 Confidential and Proprietary Information of ZTE CORPORATION...
Select Settings > Wi-Fi Settings > Basic Settings, the wireless network basic parameters are shown in the following figure: NOTE: Your device support dual band Wi-Fi, you can select the desired frequency for your device. Confidential and Proprietary Information of ZTE CORPORATION 21...
Page 24
WPA-PSK/WPA2-PSK Apply both the WPA-PSK and WPA2-PSK scheme. Wi-Fi Password: Enter the password manually. • Max Wi-Fi Station Number: Choose the maximum number of the stations which connect to the network simultaneously. Click Apply to confirm your configuration. 22 Confidential and Proprietary Information of ZTE CORPORATION...
Page 25
Frequency (Channel): Select the appropriate channel to optimize the performance and coverage • of your wireless network. Black List Select Setting > Wi-Fi Settings > Black List, the Black List configuration is shown in the following figure: Confidential and Proprietary Information of ZTE CORPORATION 23...
Select Settings > Device Settings > Web Portal Passwords, and the administrator settings information is shown in the following figure: You can change the administrator’s password. Click Apply to confirm your configuration. 24 Confidential and Proprietary Information of ZTE CORPORATION...
Page 27
Wi-Fi Performance Settings Short Wi-Fi Range: Increases battery life. Medium Wi-Fi Range: Intermediates battery life and Wi-Fi range. Long Wi-Fi Range: Extends coverage of mobile hotspot, which will decrease battery life. Confidential and Proprietary Information of ZTE CORPORATION 25...
You can set the maximum 10 filtering items for MAC/IP/Port Filtering and Port Forwarding. Port Filtering Select Settings > Firewall > Port Filtering. The MAC/IP/Port Filtering is shown in the following figure: If you select Enable, the filter settings will appear as shown below: 26 Confidential and Proprietary Information of ZTE CORPORATION...
Page 29
Protocol: Set which protocol will be used for filtering. • Action: Set how to handle the packet if it matches with the rule. • Comment: Type comment for the filter settings. • Confidential and Proprietary Information of ZTE CORPORATION 27...
Page 30
You can set up Port Mapping to enable external computers to access www, FTP or other services provided by LAN. Select Settings > Firewall > Port Mapping and the Port Mapping page is shown in the following figure: If you select Enable, the Port Mapping Settings will appear: 28 Confidential and Proprietary Information of ZTE CORPORATION...
Page 31
Universal Plug Play (UPnP) is a set of networking protocols that allows network devices, such as PC, printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other’s presence on the network and establish functional network services for data sharing, communications, and entertainment. Confidential and Proprietary Information of ZTE CORPORATION 29...
Enter the IP address of the device you want to communicate with the Internet, and then click Apply to save the settings. Router Settings Select Settings > Router Settings and the router information is shown in the following figure: 30 Confidential and Proprietary Information of ZTE CORPORATION...
Select Dial *228 and the following page will appear. Click Dial *228 to active your SIM card. Information This function allows you to view system information. Device Information Select Information > Device Information and then you can view the device information. Confidential and Proprietary Information of ZTE CORPORATION 31...
• Used Data: Set data limit. • Billing Date: Set the data billing date. • Data Alert: Set a percentage to remind you when the data/time use reaches the specified percentage. • 32 Confidential and Proprietary Information of ZTE CORPORATION...
Set your device to power up when there are new messages received. Select Messages > Messaging Settings to access the following figure: Select Enable and click Apply to enable receive messages when device power up. Confidential and Proprietary Information of ZTE CORPORATION 33...
Never use any charger or battery damaged or worn out. • Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in • 34 Confidential and Proprietary Information of ZTE CORPORATION...
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
SAR compliance for body operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. 36 Confidential and Proprietary Information of ZTE CORPORATION...
Check the default login password on the LCD screen or check the label on the device beneath the battery to get it. If you changed the password and forgot the new password, you need to restore the device to the factory default settings. Confidential and Proprietary Information of ZTE CORPORATION 37...
Page 40
ZTE Unite III User Manual For more assistance, please: • Send an E-mail to mobile@zte.com.cn • Visit www.ztedevice.com • Call the Service Hotline: +86–755–26779999 38 Confidential and Proprietary Information of ZTE CORPORATION...
Need help?
Do you have a question about the Unite III and is the answer not in the manual?
Questions and answers