Copy To Usb Memory And Read From Usb Memory - Mitsubishi Electric GB-50ADA-A Installation Instructions Manual

11 Copy to USB memory and read from USB memory

To copy the data to USB memory and to read the dada from USB memory, refer to the table below and section 11-1 "switch setting".
SW601
Item
[0: OFF, 1: ON]
No.
1 2 3 4 5 6 7 8
250 1 1 1 1 1 0 1 0
251 1 1 1 1 1 0 1 1
Note Use a USB memory that supports USB 1.1 standards.
Some security-enhanced USB memories cannot be used.
The following USB memories are checked for proper operation. (As of Oct. 2009)
a: Manufacturer: Sandisk
b: Manufacturer: Kingston
c : Manufacturer: I-O DATA
d: Manufacturer: I-O DATA
e: Manufacturer: BUFFALO Model: RUF-C2GS-**/U2
f : Manufacturer: BUFFALO Model: RUF2-C2GS-**/M
g: Manufacturer: BUFFALO Model: RUF-C4GS-**/U2
h: Manufacturer: BUFFALO Model: RUF-C8GS-**/U2
i : Manufacturer: adata
(* or ** in the models of c through h indicates color. )
Setting items
Copy to USB
memory
Set to SW606: "0"; SW607: "0"
(0) Initial setting
Copy the Initial setting data and the User info
data and User
data to the \["GB_" + Serial Number] folder in the
info data
root folder of the USB memory.
Set to SW606: "0"; SW607: "1"
(1) Initial setting Copy the Initial setting data to the \["GB_" +
data Serial Number] folder in the root folder of the
USB memory.
Set to SW606: "0"; SW607: "8"
(8) User info Copy the user info data to the \["GB_" + Serial
data Number] folder in the root folder of the USB
memory.
Set to SW606: "0"; SW607: "9"
Copy the Charge parameter data to the \["GB_" +
(9) Charge
Serial Number]\ChargeParameters\[Date] folder in
parameter
the root folder of the USB memory in the CSV
data
format.
Refer to section 11-2-1 "Charge parameter data".
Set to SW606: "0"; SW607: "A"
Copy the Power consumption data to the \["GB_" +
(10) Power
Serial Number]\ChargeParameters\[Date] folder in
consumption
the root folder of the USB memory in the CSV
data
format.
Refer to section 11-2-2 "Power consumption data"
Set to SW606: "0"; SW607: "0"
Read the data from USB memory.
Create ["SetupData_" + IP address]
["SetupData"] folder in the root folder of the USB
memory using PC.
Read from
Save the setting data
USB memory
*1: When the IP address of GB-50ADA is
Initial setting "192.168.1.1", the folder name will be
data and User
[SetupData_192_168_1_1].
info data
*2: If both ["SetupData_" + IP address] folder and
["SetupData" ] folder exist, the data from
["SetupData_" + IP address] folder will be read.
*3: "(0) Initial setting data and User info data" or
"(1) Initial setting data" or "(8) User info data"
Model: SDCZ6-2048-J65RB
Model: DT400/2GBFE
Model: TB-BH2/2G/*
Model: TB-BH2/4G/*
Model: C702
- 26 -
Explanation
*1
or
*2
*3
in the folder.
Capacity: 2G
Capacity: 2G
Capacity: 2G
Capacity: 4G
Capacity: 2G
Capacity: 2G
Capacity: 4G
Capacity: 8G
Capacity: 2G
Notes
Initial setting data
and User info data
Saving the Charge
parameter data and
Power consumption
data may take
several dozens of
minutes.
Reset the power
after all settings
have been made.
* Use FAT32 or FAT16
to format a USB
memory if necessary.