Ip Address And Network Settings - Mitsubishi Electric GB-50ADA-A Installation Instructions Manual

7-1. IP address and network settings

When connecting GB-50ADA to a dedicated LAN system, set the IP address and network settings for GB-50ADA with "Quick
IP address setting switch." (Refer to section 7-1-1 "Quick IP address setting switch.")
When connecting to an existing LAN system or settings cannot be made with Quick IP address setting switch, set them with
the detail setting switches. (Refer to section 7-1-2 "Setting the IP address or network settings with the Web browser for Initial
Settings.")
7-1-1. Quick IP address setting switch
IP address can be easily set to an address between 192.168.1.1 and 192.168.1.15 with dipswitch SW602. Set this dipswitch
before turning on the power.
SW602
[0: OFF, 1: ON]
NO
1 2 3 4
0 0 0 0 0
1 0 0 0 1
2 0 0 1 0
3 0 0 1 1
4 0 1 0 0
5 0 1 0 1
6 0 1 1 0
7 0 1 1 1
8 1 0 0 0
9 1 0 0 1
10 1 0 1 0
11 1 0 1 1
12 1 1 0 0
13 1 1 0 1
14 1 1 1 0
15 1 1 1 1
Note If fifteen or fewer GB-50ADA are connected to a dedicated network, it is recommended that the IP address be
set with SW602.
Turn all SW602 to OFF before setting the IP address or network settings with the Web browser for Initial Settings
(refer to section 7-1-2).
7-1-2. Setting the IP address or network settings with the Web browser for Initial Settings
IP address, subnet mask, or gateway address can be set with Web browser for Initial Settings. Quick IP address setting
switches (SW602) should be set to "ALL OFF" to make these settings.
Consult the network administrator for how to set the IP address, subnet mask, and gateway address when connecting
GB-50ADA to an existing LAN.
Refer to the manual for Initial settings for how to set.
IP address
Initial settings: 192.168.1.1
Use the Web browser for Initial Settings to set the IP address, subnet mask, and gateway address.
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4
192.168.1.5
192.168.1.6
192.168.1.7
192.168.1.8
192.168.1.9
192.168.1.10
192.168.1.11
192.168.1.12
192.168.1.13
192.168.1.14
192.168.1.15
Subnet mask
Initial settings: 255.255.255.0
255.255.255.0
- 20 -
Gateway address
Initial settings: 0.0.0.0
0.0.0.0