Air Flow Selector Settings; Operating Tips - Toyota 2005 MR2 Spyder Owner's Manual

04 09.01

Air flow selector settings

SB18009

Operating tips

To cool off your Toyota after it has
D
been parked in the hot sun, drive with
the windows open for a few minutes.
This vents the hot air, allowing the air
conditioning to cool the interior more
quickly.
Make sure the air intake grilles in front
D
of the windshield are not blocked (by
leaves or snow, for example).
On humid days, do not blow cold air
D
on the windshield. The windshield could
fog up because of the difference in air
temperature on the inside and outside
of the windshield.
Keep the area under the seats clear to
D
allow air to circulate throughout the ve-
hicle.
On cold days, set the fan speed to
D
"high" for a minute to help clear the
intake ducts of snow or moisture. This
can reduce the amount of fogging on
the windows.
When driving on dusty roads, close all
D
windows. If dust thrown up by the ve-
hicle is still drawn into the vehicle after
closing the windows, it is recommended
that the air intake selector be set to
FRESH and the fan speed selector to
any setting except "OFF".
2005 MR2 from Aug. '04Prod. (OM17527U)
117