Toyota 2005 MR2 Spyder Owner's Manual page 69

04 09.01
SB13114a
Type B
3. Type A—Latch the hooks of lower
straps onto the lower anchorages lo-
cated between the seat cushion and
seatback, and tighten the
straps.
Type B—Latch the buckles onto the
lower anchorages located between
the seat cushion and seatback.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 58.)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
When using the lower anchorages
lower D
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
Push and pull the child restraint
D
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
After securing the child restraint
D
system, never slide the seat or
change the seatback angle.
2005 MR2 from Aug. '04Prod. (OM17527U)
61