Toyota 2005 MR2 Spyder Owner's Manual page 67

04 09.01
SB13113
2. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the
restraint system, see "—Types of child
restraint system" on page 48.
CAUTION
Do not slide the seat after securing
D
the child restraint system.
Make sure the top strap is securely
D
latched, and check that the child
restraint system is secure by push-
ing and pulling it in different direc-
tions.
Follow all the installation instructions
provided by its manufacturer.
Store a removed cover in a safe place
such as the glove box.
Be sure to replace a cover when the an-
chor bracket is not in use.
child
—Installation with child
restraint lower anchorages
SB13116
The lower anchorages for the child re-
straint system interfaced
FMVSS225 specification are installed in
the passenger seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
passenger seat.
Child restraint system interfaced with the
FMVSS213 specification can be fixed with
these anchorages. In this case, it is not
necessary to fix the child restraint system
with a seat belt on the vehicle.
2005 MR2 from Aug. '04Prod. (OM17527U)
with the
59