Turning The Cruise Control System On And Off; Setting The Cruising Speed - Toyota 2006 Sienna Owner's Manual

Hide thumbs Also See for 2006 Sienna:

Table of Contents

TURNING THE SYSTEM ON AND OFF

To turn the cruise control on, press the

"ON- OFF" button. The "CRUISE" indicator

light on the instrument panel will come on

to indicate that the cruise control is opera-

again turns the system off.

When the system is turned off, cruising

speed must be reset when the cruise con-

trol is turned on again.

When the ignition is turned off, the system

is also automatically turned off. To use

cruise control again, press the "ON- OFF"

button again to turn it on.

To avoid accidentally engaging the

cruise control, turn the system off

when it is not in use. Make sure the

"CRUISE" indicator light is off.

06 SIENNA_U (L/O 0603)

The transmission must be in "D" or "4"

before you set the cruising speed.

Bring your vehicle to the desired speed,

push the lever down in the "- SET" direc-

tion and release it. This sets the vehicle

at that speed. If the speed is not satisfac-

tory, tap the lever up for a faster speed,

or tap it down for a slower speed. Each

tap changes the set speed by 1.6 km/h

(1.0 mph). You can now take your foot off

the accelerator pedal.

2006 SIENNA from March '06 Prod. (OM45443U)