Presetting A Station; Selecting A Station; Radio Data System - Toyota 2006 Sienna Owner's Manual

AUDIO/VIDEO SYSTEM
(b) Presetting a station
1. Tune in the desired station.
2. Touch one of the touch-screen but-
tons (1 — 6) you want and hold it until a
beep is heard. This sets the station to the
touch-screen button and the frequency
appears on the touch-screen button.
Each radio mode (AM, FM1 or FM2) can store
up to 6 stations. To change the preset station
to a different one, follow the same procedure.
The preset station memory is cancelled when
the power source is interrupted by battery dis-
connection or a blown fuse.
158
(c) Selecting a station
Tune in the desired station using one of the
following methods.
Preset tuning: Touch the touch-screen but-
ton (1 — 6) for the station you want. The
touch-screen button is highlighted and the
station frequency appears on the screen.
Seek tuning: Push the "SEEK/TRACK" but-
ton on either side. The radio will begin seek-
ing up or down for a station of the nearest fre-
quency and will stop on reception. Each time
you push the button, the stations will be
searched automatically one after another.
To scan all the frequencies: Touch "SCAN"
on the screen or push the "SCAN" button
briefly. "SCAN" appears on the screen. The
radio will find the next station and stay there
for a few seconds, and then scan again. To
select a station, touch "SCAN" or push the
"SCAN" button again.
To scan the preset stations: Touch "SCAN"
on the screen or push the "SCAN" button for
longer than a second. "P. SCAN" appears on
the screen. The radio will tune in the next pre-
set station, stay there for a few seconds, and
then move to the next preset station. To se-
lect a station, touch "SCAN" or push the
"SCAN" button again.
(d) Radio Data System
Your audio system is equipped with Radio
Data Systems (RDS). RDS mode provides
you to receive text messages from radio sta-
tions that utilize RDS transmitters.
When RDS is on, the radio can
— only select stations of a particular program
type,
— display messages from radio stations,
— search for a stronger signal station.
RDS features are available for the use only on
FM stations which broadcast RDS informa-
tion.