Overview Of The Base - VTech DS6111 User Manual

3.3

Overview of the base

1 PAGE
Touch to page all registered handsets.
2 IN USE LED
Flashes when there is an incoming call.
Steadily on when the handset is in use.
Paging
Paging is useful if you misplace your handset(s).
To start the paging tone:
P
Touch on the base. This starts the paging tone on the registered handset(s) for around 60 seconds.
NOTE:
O
When paging, if you press
To stop the paging tone:
T S
Press , , or any dial pad key (0-9, *, or #) on the handset(s),
OR
P
Touch again on the base.
7
M
or on a handset, the ringer of the handset will be silent but the handset paging feature will not be canceled.
3 CHARGING LED
Steadily On: when the handset is put into base cradle for
charging.