Silvercrest SWC 1000 C1 Operating Instructions Manual page 40

Switching on /off / Selecting a heat level
■ When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch 3 and select the output level:
–
–
–
You switch the appliance off by sliding the level switch 3 to the position "0"
■
(= appliance off ).
To fi x the styling, you can use the slide switch Cool Shot 2. The styling will
■
be fi xed by the cool air stream:
–
–
Using the attachments
Large round brush
This attachment gives the hair more volume or large curls.
Wind a slightly damp strand of hair around the large round brush q.
■
■ Switch the appliance on at level 1 or 2.
When the strand is dry, slide the slide switch Cool Shot 2 upwards.
■
Wait until the strand has cooled.
Unwind the large round brush q from the strand.
■
■ Proceed with the other strands in the same way.
Small round brush
With this attachment you can put curls or waves into your hair.
Wind a slightly damp strand of hair around the small round brush 0.
■
■ Switch the appliance on at level 1 or 2.
When the strand is dry, slide the slide switch Cool Shot 2 upwards.
■
Wait until the strand has cooled.
Unwind the small round brush 0 from the strand.
■
■ Proceed with the other strands in the same way.
SWC 1000 C1
"0" The appliance is switched off
"1" for a reduced air-fl ow strength with heat
"2" for a high air-fl ow strength with heat
During operation, slide the slide switch Cool Shot 2 upwards.
The air fl ow will be cooler.
When you want to deactivate the cool air stream, slide the slide switch
Cool Shot 2 downwards.
11
10
GB
37