Mitsubishi MCFH-13NV Service Manual page 60

OPERATING PROCEDURE
3. Removing the outdoor fan motor
(1) Remove the cabinet. (Refer to 1)
(2) Unconnect the connector remove the clamp of fan motor
lead wire.
(3) Remove the propeller nut and remove the propeller.
(4) Remove screws fixing the fan motor.
4. Removing the compressor
(1) Remove the cabinet. (Refer to 1)
(2) Remove the soundproof felt.
(3) Remove the terminal cover on the compressor
(4) Remove the electrical assembly.
(Refer to 2)
(5) Release gas from the refrigerant circuit.
(6) Disconnect the welded part of the discharge pipe
(7) Disconnect the welded part of the suction pipe.
(8) Remove nuts fixing the compressor.
(9) Remove the compressor.
Photo 4
Set screws for
outdoor fan motor
propeller fan
Outdoor
fan motor
Propeller
fan nut
Photo 5
Discharge
pipe
Compressor
60
PHOTOS
Lead clamps
Set screws for
outdoor fan motor
Terminal cover
Compressor nuts
Suction
pipe