Electrical Connection; Circuit Diagram - Vinotemp VT - 28TEDS Owner's Manual

Improper use of the grounded plug can result in the risk of electrical
shock. If the power cord is damaged, frayed or shows cracks or abrasions
across its length, have it replaced at an authorized service center.
For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in combination with a properly connected grounding-type
outlet.
Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
The cord should be secured behind the unit and not left exposed or dangling to prevent
accidental injury.
A standard electrical supply (110V AC only, 60Hz), properly grounded in accordance with the
National Electrical Code and local codes and ordinances, is required.
Never unplug the unit by pulling the power cord. To disconnect the appliance, always grip the
plug firmly and pull straight out from the wall outlet. When moving
the unit, be careful not to damage the power cord.
The unit should always be plugged into its own individual electrical
outlet with a voltage rating that matches the rating label on the unit.
EXTENSION CORD
CAUTION: It is strongly recommended that you do not use an adapter or
an extension cord with this unit.
6

ELECTRICAL CONNECTION

CIRCUIT DIAGRAM

W W W . V I N O T E M P . C O M
6