Garmin G1000 Pilot's Manual page 19

Displaying Terrain Information on the
Navigation Map Page
Terrain data can be displayed on the Navigation
Map Page by pressing the TERRAIN softkey. Terrain
symbology (mountain icons) appear next to the map
range in the bottom right corner of the page indicating
the presence of terrain data on the map.
Terrain Proximity Page section for a terrain color
interpretation chart.
To display terrain data on the Navigation
Map Page:
1. Press the MAP softkey.
2. Press the TERRAIN softkey. Press the TERRAIN
softkey again to remove terrain data from the
Navigation Map Page.
TRAFFIC
softkey
Figure 8A.2.5 TRAFFIC, TOPO, TERRAIN and LTNG Softkeys
Displaying Traffic on the Navigation Map Page
Pressing the TRAFFIC softkey displays Traffic
Information Service (TIS) traffic on the Navigation Map
Page. TIS is a ground-based service providing relative
location of all ATCRBS Mode-A and Mode-C transponder
equipped aircraft within a specified service volume.
190-00392-02 Rev. A
See the
TOPO
softkey
TERRAIN softkey
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
The TIS ground sensor uses real time track reports to
generate traffic notification. Surveillance data includes
all transponder-equipped aircraft within the coverage
volume. The G1000 displays up to eight traffic targets
within a 7.5 nautical mile radius, from 3,000 feet below to
3,500 feet above the requesting aircraft. See Appendix E
for a full description of TIS. A traffic symbol appears next
to the map range in the bottom right corner of the display
indicating the presence of traffic data on the map.
To display traffic on the Navigation Map
Page:
Press the MAP softkey.
1.
Press the TRAFFIC softkey. Press the
2.
TRAFFIC softkey again to remove traffic from the
Navigation Map Page.
NOTE: Traffic and terrain data can also be
displayed by using the 'On/Off' Navigation Map
Page option. See the Navigation Map Page setup
section for details.
NAVIGATION MAP PAGE
8A-17