Garmin G1000 Pilot's Manual page 118

WAYPOINT PAGE GROUP
Use 'Present Position' when selected will move the
currently selected user waypoint to the present position
of the aircraft.
NOTE: The user waypoint is set to the airplane's
position at the time when this option was
selected.
To move the currently selected user
waypoint to the present position of the
aircraft:
1. Select the User Waypoint Information Page
and press the MENU key to display the User
Waypoint Information Page options.
Turn the large FMS knob to select 'Use Present
2.
Position' and press the ENT key.
Highlight the position and press the ENT key.
3.
'Auto Comment' when selected will overwrite the
currently selected user waypoints comment with an
automatically generated comment. The auto comment is
in the same format as comments that are generated for user
waypoints that have not specified a unique user waypoint
comment. The auto comment can be one of three styles:
• REF1BRG1 / DIS1 - if the user waypoint position
is defined by a reference 1 waypoint radial and
distance (this is generally the default case, but
the default case could also be the BLANK (c) case
if there are no reference waypoints near the user
waypoints position)
• REF1BRG1 / REF2BRG2 - if the user waypoint
position is defined by a reference 1 waypoint
radial and a reference 2 waypoint radial
• BLANK - if no reference waypoints are near the
user waypoints position
8A-116 Garmin G1000 MFD Pilot's Guide for Cessna Nav III
To overwrite the currently selected user
waypoints comment with an automatically
generated comment:
1. Select the desired waypoint on the User
Waypoint Information Page and press MENU
to display the User Waypoint Information Page
options.
Turn the large FMS knob to select 'Auto Com-
2.
ment' and press the ENT key.
190-00392-02 Rev. A