Garmin G1000 Pilot's Manual page 127

Utility Page Operations
To set the generic timer direction (up,
down):
1. Select the AUX UTILITY Page.
2. Press the FMS knob. The 'GENERIC' timer field
is highlighted.
Turn the small FMS knob to display the 'UP/
3.
DOWN' window.
4. Turn the small or large FMS knob to select 'UP'
or 'DOWN' and press the ENT key.
To start, stop, or reset the generic timer:
1. Select the AUX UTILITY Page.
2. Press the FMS knob. Turn the large FMS knob
to select the 'START?' Field.
Press the ENT key to start, stop, or reset the
3.
timer.
To set the generic timer value:
1. Select the AUX UTILITY Page.
2. Press the FMS knob. Turn the large FMS knob
to select the time field (hh/mm/ss).
Turn the small and large FMS knobs to set the
3.
desired time and press the ENT key.
To set the flight timer starting criteria
(ground speed more then 30 knots, power
on):
1. Select the AUX UTILITY Page.
2. Press the FMS knob. Turn the large FMS knob
to select the 'FLIGHT' field.
Turn the small FMS knob to display the selection
3.
window.
4. Turn the small or large FMS knob to select either
PWR-ON or GS>30KT and press the ENT key.
190-00392-02 Rev. A Garmin G1000 MFD Pilot's Guide for Cessna Nav III
AUXILIARY PAGE GROUP
To set the departure timer starting criteria
(ground speed more then 30 knots, power
on):
1. Select the AUX UTILITY Page.
2. Press the FMS knob. Turn the large FMS knob
to select the 'DEPARTURE TIME' field.
Turn the small FMS knob to display the selection
3.
window.
4. Turn the small or large FMS knob to select either
PWR-ON or GS>30KT and press the ENT key.
To reset the flight timer:
1. Select the AUX UTILITY Page.
Press the MENU key. Turn either the small or
2.
large FMS knob to select 'Reset Flight Timer'.
Press the ENT key.
3.
To reset the departure timer:
1. Select the AUX UTILITY Page.
2. Press the MENU key. Turn either the small or
large FMS knob to select 'Reset Departure
Time'.
Press the ENT key.
3.
8A-125