Garmin G1000 Pilot's Manual page 13

NAVIGATION MAP PAGE OPERATIONS
The following Navigation Map Page operations can be
performed:
• Changing the Map Orientation
• Selecting a Map Range
• Using the Auto Zoom Feature
• Identifying Aviation Map Data
• Decluttering the Map
• Panning the Map
• Displaying Topographic Information on the Navi-
gation Map Page
• Displaying Terrain Information on the Navigation
Map Page
• Displaying Traffic on the Navigation Map Page
• MFD Navigation Status Window
• Navigation Map Page Options Menu
Changing the Map Orientation
See the map setup section of this MFD Pilot' s Guide for
instructions on how to change the map orientation.
Selecting a Map Range
The Navigation Map Page can be set to 23 different
range settings from 500 feet to 2000 nautical miles. The
current range is indicated in the lower right corner of the
Navigation Map Page and represents the top-to-bottom
distance covered by the map. To change the map range
turn the joystick counter-clockwise to zoom in, turn it
clockwise to zoom out.
190-00392-02 Rev. A
Using the Auto Zoom Feature
from an enroute range of 2000 nm through each lower
range, stopping at a range of 1.5 nm as the aircraft
approaches the destination waypoint. See the Map Setup
section in this MFD Pilot' s Guide for instructions on
enabling/disabling the autozoom feature.
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
NAVIGATION MAP PAGE
The autozoom feature automatically adjusts the map
Figure 8A.2.2 Map Range
Map Range
Indicator
8A-11