Recording Time Available; Delete All Old Messages And Memo; Tam Alert; Call Screening - Motorola DIGITAL CORDLESS PHONE D210 User Manual

Allegro_CID TAD.book Page 15 Tuesday, January 15, 2008 4:30 PM
first in the order they were received. Then you can play back
all messages, new and old.

Recording time available

Up to 10 minutes of messages can be recorded. Press
play your messages.
The total number of new (or old) messages is announced.
As each message is played, the day and time the message was
received are announced.
Use or to adjust the volume during playback.
During message playback:
Press to skip forwards and play the next message.
Press to replay the current message.
If you press while the day/time are playing back, the previous
message will be played back.
Press to stop message playback.
Press to delete the currently playing message.
You can also play back your message from the handset by
following step:
1. Press to access the main menu.
2. Press or to select "TAM" and press
to select "PLAY MESSAGE" and press
3. Press or
While playing a message, you can skip, repeat, and delete the
message by pressing the handset button.
Button Function
Skip the message
Repeat the message
Button
to

Delete all old messages and memo

You cannot delete new messages. You must listen to
messages before they can be deleted.
Press and hold

TAM Alert

When the message alert is on, and you have new messages
stored on your answering machine, you will hear a tone every
60 seconds. The message alert can be set to On or Off.
In standby mode:
1. Press
2. Press or
3. Press or
4. Press or
.
5. Press or
.

Call screening

When a caller is leaving a message you can listen in over the
base loudspeaker and decide if you want to take the call in
person.

Answering Mode

You can set different answering modes. Choose from "ANS WITH
REC" or "ANS NO REC". "ANS WITH REC" allows user to leave a
Function
Delete the message
Stop playing the message
. Then you will hear "All messages deleted."
to access the main menu.
to select "TAM" and press .
to select "TAM SETTINGS" and press
to select "TAM ALERT" and press
to select "ON" or "OFF" and press
.
.
.
15