Phonebook Status; Answering Machine; Select And Record Your Ogm - Motorola DIGITAL CORDLESS PHONE D210 User Manual

Allegro_CID TAD.book Page 13 Tuesday, January 15, 2008 4:30 PM
4. If you select "DELETE ENTRY", press
for the entry you want (or search alphabetically). Press
.
5. "CONFIRM ?" is displayed. Press

Phonebook status

This allows you to show how many entries are stored in the
phonebook.
1. Press .
2. Press or to select "PHONEBOOK".
Press .
to select "PB STATUS". Press
3. Press or
The phonebook status is displayed.

9. Answering machine

The answering machine comes pre-set to "Answer On" and is
ready to answer calls and take messages once your phone is
set up (see page 4).
Whenever you use the answering machine, you will hear voice
prompt instructions to assist you.
Switch the answering machine on/off
Press on the base to switch the answering machine ON or
OFF.
OR
1. Press on the handset to access the main menu.
2. Press or to select "TAM" and press
to select "TAM SETTINGS" and press
3. Press or
or to display the name 4. Press
5. Press
When the answering machine is switched on, the number of
messages stored in your answering machine appears.
.
The number of messages on the base will go out when set to
OFF.
Outgoing message
Your answering machine comes with a pre-set outgoing
message (OGM) that is played to your callers when your
answering machine takes a call. The pre-set message is
"Hello your call cannot be taken at the moment. Please leave
your message after the tone."
You can also record your own personalised OGM. This will
.
replace the pre-set OGM.

Select and record your OGM

Your OGM can be up to 30 seconds long. If you record a new
OGM, it will replace the current OGM.
1. Press
2. Press
3. Press
4. Press
5. Press
6. Press
. PLAYBACK: the active outgoing message for the Answering
mode option will be played.
.
to select "TAM ON/OFF" and press
or
or to select "OFF" or "ON" and press
to access the main menu.
or to select "TAM" and press
to select "TAM SETTINGS" and press
or
to select "SET OGM" and press
or
to select "ANS WITH REC " or "ANS NO REC" and press
or
.
or to select "PLAYBACK", "RECORD", or "DEFAULT".
.
.
.
.
.
13