Table of Contents
Advertisement
Spray Extraction of
Carpeted Floors
OPERATING
E- Spray Extraction Liquid Tank Connection Hose - Push
the plug connector on the connection hose in to the corre-
sponding aperture in the hood as far as it will go. Take care
to ensure that the hose is not kinked and that the end of the
hose with the strainer is positioned at the bottom of the tank.
Spray extraction liquid. Remove the screw plug from the
tank and pour in the mixture of water and concentrated
cleaning agent with the aid of the funnel. The capacity of the
tank is 4.5 liters.
WARNING!
Use only non-polluting, environmentfriendly cleaning
agents. Please observe the mixture ratio specified by
the manufacturer.
F- Accessories - Insert the floor nozzle (or the sofa nozzle)
on the extension tubes. Connect the sprayer tube to the pin
of the extension tubes (push and turn anti-clockwise).
A- After desired accessory has been selected
and installed, proceed as follows:
• Unwind the mains lead and insert the
plug into the power point.
• Set the control switch to maximum
suction power.
• Switch on the appliance by lightly
pressing the ON/OFF switch.
• Start the pump by the applying light
pressure to the switch.
B- Method of Operation
GB
15
Advertisement
Table of Contents
