Warning Lamps - CITROEN Jumpy Multispace Owner's Handbook Manual

WARNING LAMPS

Each time the engine is started: a series of warning lamps comes on applying a check auto-test. They go off again almost immediately.
When the engine is running: the warning lamp becomes a warning if it remains on continuously or flashes. This initial warning may be
accompanied by an audible signal and a message in the screen.
Do not ignore these warnings .
Warning lamp is
on, associated
with another
warning
STOP lamp and
accompanied by
a message in the
screen.
on.
on.
Parking brake /
Brake fl uid level / remains on, even
though the level
EBFD
is correct and
associated with the
ABS warning lamp.
on while driving.
Engine oil
pressure and
remains on, even
temperature
though the level
is correct.
indicates
major faults linked with the
"Brake fluid level", "Engine oil
pressure and temperature",
"Coolant temperature",
"Electronic brake force
distribution" or "Power steering"
warning lamps.
parking brake applied or not
released correctly.
low brake fluid level.
failure of the electronic brake
force distribution.
insufficient pressure or
temperature too high.
major fault.
Instruments and controls
Solution - action
You must stop as soon as it is safe to do so. Park,
switch off the ignition and call a CITROËN dealer or
a qualified workshop.
Releasing the parking brake switches off the warning lamp.
Top up using a fluid recommended by CITROËN.
You must stop as soon as it is safe to do so. Park,
switch off the ignition and call a CITROËN dealer or
a qualified workshop.
Park, switch off the ignition and allow to cool. Visually
check the level. Chapter 6, "Levels" section.
Call a CITROËN dealer or a qualified workshop.
2