CITROEN Jumpy Multispace Owner's Handbook Manual page 222

Table of Contents

Advertisement

FREQUENTLY ASKED QUESTIONS
QUESTION
Some contacts are
The options for synchronizing contacts are synchronizing the contacts
duplicated in the list.
on the SIM card, the contacts on the telephone, or both. When both
synchronizations are selected, some contacts may be duplicated.
Contacts are not shown
Some telephones offer display options. Depending on the settings
in alphabetical order.
chosen, contacts can be transferred in a specifi c order.
The system does not receive
The Bluetooth mode does not permit sending SMS text messages to
SMS text messages.
the system.
The CD is ejected
The CD is inserted upside down, is unplayable, does not contain any
automatically or is not
audio data or contains an audio format which the player cannot play.
played by the player.
Le CD has been recorded in a format that is not compatible with the player.
The CD is protected by an anti-pirating protection system which is not
recognised by the audio system.
There is a long waiting
When a new medium is inserted, the system reads a certain amount of
period following the insertion
data (directory, title, artist, etc.). This may take from a few seconds to a
of a CD or connection of a
few minutes.
USB memory stick.
The CD player sound is
The CD used is scratched or of poor quality.
poor.
The audio equipment settings (bass, treble, ambiences) are unsuitable.
9.58
ANSWER
SOLUTION
Select "Display SIM card contacts" or "Display
telephone contacts".
Modify the display setting in the telephone
directory.
-
Check that the CD is inserted in the player the
right way up.
-
Check the condition of the CD: the CD cannot
be played if it is too damaged.
-
Check the content in the case of a recorded
CD: refer to the advice in the "AUDIO"
section.
-
The audio system's CD player does not play DVDs.
-
Some recorded CDs will not be played by
the audio system because they are not of the
correct quality.
This phenomenon is normal.
Insert good quality CDs and store them in suitable
conditions.
Set the treble or bass level to 0, without selecting
an ambience.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents