Declaration Of Conformity; Mounting And Operation; Troubleshooting - Bosch Rotak 37 Ergoflex Original Instructions Manual

Hide thumbs Also See for Rotak 37 Ergoflex:
Table of Contents

Advertisement

OBJ_BUCH-2011-004.book Page 7 Tuesday, September 30, 2014 8:26 AM

Declaration of Conformity

We declare under our sole responsibility that the product described under
"Technical data" is in conformity with all relevant provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC, 2000/14/EC including their
amendments and complies with the following standards:
EN 60335-1, EN 60335-2-77.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex VI.
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker
Helmut Heinzelmann
Executive Vice President
Head of Product Certification
Engineering
PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
29.09.2014

Troubleshooting

TOP
Problem
Possible Cause
Motor refuses to start
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Grass too long
Motor protector has activated
Machine functions
Extension cable damaged
intermittently
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated
Machine leaves ragged
Height of cut too low
finish
Cutting blade blunt
and/or
Possible clogging
Motor labours
Blade fitted upside down
Bosch Power Tools
3 600 ...
dB(A)

Mounting and Operation

Action
Delivery Scope
Handle Assembly
Snap together the Grassbox
Grassbox fitting/removing
Adjusting the Cutting Height
Starting
Working Advice
Stopping
Working Advice
Blade Maintenance
Selecting Accessories
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Increase height of cut and tilt garden product to reduce starting
load
Allow motor to cool and increase height of cut
Inspect cable, replace if damaged
Allow motor to cool and increase height of cut
Increase height of cut
Replace the blade
Check underneath the garden product and clear out as neces-
sary (always wear protective gloves)
Refit blade correctly
English | 7
HA4 1..
HA4 2..
HA4 3..
94
94
95
Figure
Page
1
9
2
10
3
10
3
11
4
11
5
11–12
5
11–12
5
11–12
6
13
7
13
8
14
F 016 L81 157 | (30.9.14)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents