Programming The Interference Eliminator Code; Assigning Channels To Presets (15 Ch Models Only) - Motorola CP100 User Manual

Programming the Interference Eliminator Code

The Interference Eliminator Code helps minimize interference by
providing you with code combinations, which filter out static, noise,
and unwanted messages.
1. Enter Programming Mode as necessary, refer to "Entering
Programming Mode" on page 20.
2. Press \ until the Interference Eliminator Code display number
begins to flash.
3. Press [ or ] to select the desired Code (See "Interference Eliminator Codes"
beginning on page 37).
4. Press and hold M to exit k, or press \ to continue.

Assigning Channels to Presets (15 ch models only)

Presets allow you to easily switch to more frequently-used channels.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 20.
2. Press [ or ] to select the desired channel.
3. Press and hold T or S to assign that channel to a preset, radio beeps to
confirm. All of the channel settings are assigned to that preset button.
4. Press and hold M to exit k, or press \ to continue.
22
Interference
Eliminator
01075
Code