Getting Started; Installing The Swivel Belt Holster - Motorola CP100 User Manual

Getting Started

This User's Guide covers several CP100 models, and may detail some features your
radio does not have. Your model number is shown on the inside of the radio and can
been seen by removing the battery.

Installing the Swivel Belt Holster

1. Slide the bottom of radio into the holster until it snaps into
place.
2. To remove, push the tab above the battery door and pull the
radio from holster.
Note: In case of loss, please contact your point-of-sale or call
1-800-422-4210 to request replacement part number
NNTN4106.
NNTN4106 Swivel
Belt Holster
5