Battery Charging
The four slot Ethernet cradle can charge up to four wearable terminals simultaneously. To charge the wearable
terminal:
Slide the wearable terminal into the wearable terminal slot.
1.
The wearable terminal amber Charge Status LED indicates the wearable terminal battery charging status. The
2.
Standard Battery usually charges in less than four hours.See
When charging is complete, remove the wearable terminal from the cradle.
3.
LED Charge Indications
The Four Slot Ethernet cradle uses the wearable terminal amber Power LED to indicate the battery charging
status. See
Table 3-1 on page 3-3
Speed LED
The green Speed LED lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that the
transfer rate is 10 Mbps.
Link LED
The yellow Link LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit, it
indicates that there is no link.
Battery Charging Indicators
The wearable terminal's amber charge LED indicates the status of the battery charging in the wearable terminal.
See
Table 1-3 on page 1-6
The standard capacity battery fully charges in less than four hours.
for charging status indications.
for charging status indications.
Table 3-1
for charging status indications.
Accessories
3 - 5