Electrical Safety - Beko DCY 9316 W User Manual

Important safety and environmental instructions

1.1.1 Electrical safety

A
Electrical safety instructions should be followed
while electrical connection is made during the
installation.
• Connect the dryer to a grounded outlet protected by a
fuse at the value specified on the type label. (See 2.1
Overview) Have the grounding installation performed by
a qualified electrician. Our company shall not be liable for
any damages that will arise when the dryer is used without
grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the
type label plate. (See 2.1 Overview)
• The voltage specified on the type label must be equal to
your mains voltage. (See 2.1 Overview)
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation,
maintenance, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by
pulling on the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to
connect the dryer to power supply in order to decrease the
risk of fire and electric shock.
• Power cable plug must be easily accessible after
installation.
B
Damaged mains cable should be changed by an
Authorised Service agent.
B
If the dryer is faulty, it must not be operated unless
it is repaired by an authorised service agent! There is
the risk of electric shock!
Dryer / User Manual
5 / EN