Adjusting The Feet; Electrical Connection; Transportation Of The Machine; Changing The Illumination Lamp - Beko DCY 9316 W User Manual

Installation
4 Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
1
3
A
Hose connection should be made
in a safe manner. Your drain house
will be flooded if the hose comes
out of its housing during water
discharge.
C
Water drain hose should be
attached to a height of maximum
100 cm.
C
Make sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the machine.

3.4 Adjusting the feet

In order to ensure that the dryer operates
more silently and vibration-free, it must stand
level and balanced on its feet. Balance the
machine by adjusti
ng the feet.
Turn the feet to left or right until the dryer
stands level and firmly.
Dryer / User Manual
2
4
C
Never unscrew the adjustable feet
from their housings.

3.5 Electrical connection

For specific instructions for electrical connec-
tion required during installation (See 1.1.1
Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
We recommend carrying the
A
dryer in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.
3.7 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.
The lamp(s) used in this appliance is not suit-
able for household room illumination. The
intended purpose of this lamp is to assist the
user to place laundry in the tumble dryer in a
comfortable way. The lamps used in this ap-
pliance have to withstand extreme physical
conditions such as vibrations and tempera-
tures above 50 °C.
15 / EN