Using Expert Mode; Using The Clearframe™ Feature; Using The Mpeg Nr Feature; Using The Dnr Feature - Toshiba 40XV648U Owner's Manual

Using Expert Mode

This feature individually enables/disables the Red,
Green, and Blue components of the picture to allow for
more accurate adjustment of each color.
1
From the PICTURE menu, highlight Advanced
Picture Settings and press T.
2
Press B or b to select Expert Mode, and then press
T.
3
Press B or b to select either Red, Green or Blue.
4
Press C or c to select On.
5
Press b to select Color or Tint, press C or c to
adjust, and then press O.
Note:
• If the Picture Mode is set to AutoView, this feature will
be grayed out.
• When the Expert Mode menu is exited, the Red, Green
and Blue components will be re-enabled.
• It is not possible to turn off all three colors at the same
time.
Using the ClearFrame™ feature
The ClearFrame 120 Hz anti-blur technology doubles
the frame rate from 60 frames per second to 120 frames
per second, virtually eliminating motion blur without
adding flicker or reducing image brightness.
1
From the PICTURE menu, highlight Advanced
Picture Settings and press T.
2
Press B or b to select ClearFrame.
3
Press C or c to select On, and then press O.
Note: If the Picture Mode is set to Game, this feature will
be grayed out.
54
XV648U_10C07.pdf 2
Chapter 7: Using the TV's advanced features

Using the MPEG NR feature

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1
2
3
4
Note: If the Picture Mode is set to Game, this feature will
be grayed out.

Using the DNR feature

DNR enables you to "soften" the screen representation
of a weak signal to reduce the noise effect.
1
2
3
4
Note:
• If the Picture Mode is set to Game, this feature will be
• The differences may not always be noticeable (for the
From the PICTURE menu, highlight Advanced
Picture Setings and press T.
Press B or b to select Noise Reduction and press
T.
Press B or b to highlight the MPEG NR.
Press C or c to select either Off, Low, Middle, or
High and press T.
From the PICTURE menu, highlight Advanced
Picture Settings and press T.
Press B or b to select Noise Reduction and press
T.
Press B or b to select DNR.
Press C or c to select Low, Middle, High, Auto or
Off and press T.
grayed out.
best result use lower settings as picture quality can be
lost if the setting is too high)
2009/07/10 11:02:53